cisco.ise.egress_matrix_cell module – Resource module for Egress Matrix Cell

Note

This module is part of the cisco.ise collection (version 2.9.5).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ise. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.ise.egress_matrix_cell.

New in cisco.ise 1.0.0

Synopsis

• Manage operations create, update and delete of the resource Egress Matrix Cell.

• This API creates an egress matrix cell.

• This API deletes an egress matrix cell.

• This API allows the client to update an egress matrix cell.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

• ciscoisesdk >= 2.2.3

• python >= 3.5

Parameters

Parameter	Comments
defaultRule string	Allowed values - NONE, - DENY_IP, - PERMIT_IP.
description string	Egress Matrix Cell’s description.
destinationSGtId string	Egress Matrix Cell’s destinationSGtId.
id string	Egress Matrix Cell’s id.
ise_debug boolean	Flag for Identity Services Engine SDK to enable debugging. Choices: false ← (default) true
ise_hostname string / required	The Identity Services Engine hostname.
ise_password string / required	The Identity Services Engine password to authenticate.
ise_single_request_timeout integer added in cisco.ise 3.0.0	Timeout (in seconds) for RESTful HTTP requests. Default: 60
ise_username string / required	The Identity Services Engine username to authenticate.
ise_uses_api_gateway boolean added in cisco.ise 1.1.0	Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices: false true ← (default)
ise_uses_csrf_token boolean added in cisco.ise 3.0.0	Flag that informs the SDK whether we send the CSRF token to ISE’s ERS APIs. If it is True, the SDK assumes that your ISE CSRF Check is enabled. If it is True, it assumes you need the SDK to manage the CSRF token automatically for you. Choices: false ← (default) true
ise_verify boolean	Flag to enable or disable SSL certificate verification. Choices: false true ← (default)
ise_version string	Informs the SDK which version of Identity Services Engine to use. Default: "3.1_Patch_1"
ise_wait_on_rate_limit boolean	Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices: false true ← (default)
matrixCellStatus string	Allowed values - DISABLED, - ENABLED, - MONITOR.
name string	Egress Matrix Cell’s name.
sgacls list / elements=string	Egress Matrix Cell’s sgacls.
sourceSGtId string	Egress Matrix Cell’s sourceSGtId.

Notes

Note

• SDK Method used are egress_matrix_cell.EgressMatrixCell.create_egress_matrix_cell, egress_matrix_cell.EgressMatrixCell.delete_egress_matrix_cell_by_id, egress_matrix_cell.EgressMatrixCell.update_egress_matrix_cell_by_id,

• Paths used are post /ers/config/egressmatrixcell, delete /ers/config/egressmatrixcell/{id}, put /ers/config/egressmatrixcell/{id},

• Does not support check_mode

• The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK

• The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection

Examples

- name: Update by id
  cisco.ise.egress_matrix_cell:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    defaultRule: string
    description: string
    destinationSgtId: string
    id: string
    matrixCellStatus: string
    name: string
    sgacls:
    - string
    sourceSgtId: string

- name: Delete by id
  cisco.ise.egress_matrix_cell:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: absent
    id: string

- name: Create
  cisco.ise.egress_matrix_cell:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    defaultRule: string
    description: string
    destinationSgtId: string
    matrixCellStatus: string
    name: string
    sgacls:
    - string
    sourceSgtId: string

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
ise_response dictionary	A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: {"defaultRule": "string", "description": "string", "destinationSgtId": "string", "id": "string", "link": {"href": "string", "rel": "string", "type": "string"}, "matrixCellStatus": "string", "name": "string", "sgacls": ["string"], "sourceSgtId": "string"}
ise_update_response dictionary added in cisco.ise 1.1.0	A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: {"UpdatedFieldsList": {"field": "string", "newValue": "string", "oldValue": "string", "updatedField": [{"field": "string", "newValue": "string", "oldValue": "string"}]}}

Authors

• Rafael Campos (@racampos)

Collection links

• Issue Tracker
• Repository (Sources)