cisco.nxos.nxos_vpc module – Manages global VPC configuration

Note

This module is part of the cisco.nxos collection (version 9.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_vpc.

New in cisco.nxos 1.0.0

Synopsis

• Manages global VPC configuration

Aliases: vpc

Parameters

Parameter	Comments
auto_recovery boolean	Enables/Disables auto recovery on platforms that support disable timers are not modifiable with this attribute mutually exclusive with auto_recovery_reload_delay Choices: false true
auto_recovery_reload_delay string	Manages auto-recovery reload-delay timer in seconds mutually exclusive with auto_recovery
delay_restore string	manages delay restore command and config value in seconds
delay_restore_interface_vlan string	manages delay restore interface-vlan command and config value in seconds not supported on all platforms
delay_restore_orphan_port string	manages delay restore orphan-port command and config value in seconds not supported on all platforms
domain string / required	VPC domain
peer_gw boolean	Enables/Disables peer gateway Choices: false true
pkl_dest string	Destination (remote) IP address used for peer keepalive link pkl_dest is required whenever pkl options are used.
pkl_src string	Source IP address used for peer keepalive link
pkl_vrf string	VRF used for peer keepalive link The VRF must exist on the device before using pkl_vrf. (Note) ‘default’ is an overloaded term: Default vrf context for pkl_vrf is ‘management’; ‘pkl_vrf: default’ refers to the literal ‘default’ rib.
role_priority string	Role priority for device. Remember lower is better.
state string	Manages desired state of the resource Choices: "present" ← (default) "absent"
system_priority string	System priority device. Remember they must match between peers.

Notes

Note

• Tested against NXOSv 7.3.(0)D1(1) on VIRL

• Unsupported for Cisco MDS

• The feature vpc must be enabled before this module can be used

• If not using management vrf, vrf must be globally on the device before using in the pkl config

• Although source IP isn’t required on the command line it is required when using this module. The PKL VRF must also be configured prior to using this module.

• Both pkl_src and pkl_dest are needed when changing PKL VRF.

• For information on using CLI and NX-API see the :ref:`NXOS Platform Options guide <nxos_platform_options>`

• For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`

• For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.

Examples

- name: configure a simple asn
  cisco.nxos.nxos_vpc:
    domain: 100
    role_priority: 1000
    system_priority: 2000
    pkl_dest: 192.168.100.4
    pkl_src: 10.1.100.20
    peer_gw: true
    auto_recovery: true

- name: configure
  cisco.nxos.nxos_vpc:
    domain: 100
    role_priority: 32667
    system_priority: 2000
    peer_gw: true
    pkl_src: 10.1.100.2
    pkl_dest: 192.168.100.4
    auto_recovery: true

- name: Configure VPC with delay restore and existing keepalive VRF
  cisco.nxos.nxos_vpc:
    domain: 10
    role_priority: 28672
    system_priority: 2000
    delay_restore: 180
    peer_gw: true
    pkl_src: 1.1.1.2
    pkl_dest: 1.1.1.1
    pkl_vrf: vpckeepalive
    auto_recovery: true

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
commands list / elements=string	commands sent to the device Returned: always Sample: ["vpc domain 100", "peer-keepalive destination 192.168.100.4 source 10.1.100.20 vrf management", "auto-recovery", "peer-gateway"]

Authors

• Jason Edelman (@jedelman8)

• Gabriele Gerbino (@GGabriele)

Collection links

• Issue Tracker
• Repository (Sources)