dellemc.enterprise_sonic.sonic_route_maps module – route map configuration handling for SONiC
Note
This module is part of the dellemc.enterprise_sonic collection (version 2.5.1).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.
To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_route_maps.
New in dellemc.enterprise_sonic 2.1.0
Synopsis
This module provides configuration management for route map parameters on devices running SONiC.
Parameters
Parameter |
Comments |
|---|---|
Specifies a list of route map configuration dictionaries |
|
action type for the route map (permit or deny) This value is required for creation and modification of a route map or route map attributes as well as for deletion of route map attributes. It can be omitted only when requesting deletion of a route map statement or all route map statements for a given route map map_name. Choices:
|
|
Name of a route map to jump to after executing ‘match’ and ‘set’ statements for the current route map. |
|
Name of a route map |
|
Criteria for matching the route map to a route |
|
Name of a configured BGP AS path list to be checked for a match with the target route |
|
Name of a configured BGP “community” to be checked for a match with the target route |
|
BGP Ethernet Virtual Private Network to be checked for a match with the target route |
|
Default EVPN type-5 route Choices:
|
|
Non-default route type: One of the following: mac-ip route, EVPN Type 3 Inclusive Multicast Ethernet Tag (IMET) route, or prefix route Choices:
|
|
VNI ID to be checked for a match; specified by a value in the range 1-16777215 |
|
Name of a configured BGP ‘extended community’ to be checked for a match with the target route |
|
Next hop interface name (type and number) to be checked for a match with the target route. The interface type can be any of the following; ‘Ethernet/Eth’ interface or sub-interface, ‘Loopback’ interface, ‘PortChannel’ interface or sub-interface, ‘Vlan’ interface. |
|
IP addresses or IP next hops to be checked for a match with the target route |
|
name of an IPv4 prefix list containing a list of address prefixes to be checked for a match with the target route |
|
name of a prefix list containing a list of next-hop prefixes to be checked for a match with the target route |
|
IPv6 addresses to be checked for a match with the target route |
|
name of an IPv6 prefix list containing a list of address prefixes to be checked for a match with the target route |
|
local-preference value to be checked for a match with the target route. This is a value in the range 0-4294967295. |
|
metric value to be checked for a match with the target route. This is a value in the range 0-4294967295. |
|
BGP origin to be checked for a match with the target route Choices:
|
|
BGP routing peer/neighbor required for a matching route ip, ipv6, and interface are mutually exclusive. |
|
Name (type and number) of a BGP peer interface Allowed interface types are Ethernet or Eth (depending on the configured interface-naming mode), Vlan, and Portchannel |
|
IPv4 address of a BGP peer |
|
IPv6 address of a BGP peer |
|
Source protocol required for a matching route Choices:
|
|
Name of the source VRF required for a matching route |
|
Tag value required for a matching route The value must be in the range 1-4294967295 |
|
unique number in the range 1-66535 to specify priority of the map This value is required for creation and modification of a route map or route map attributes as well as for deletion of route map attributes. It can be omitted only when requesting deletion of all route map “statements” for a given route map “map_name”. |
|
Information to set into a matching route for re-distribution |
|
String specifying a comma-separated list of AS-path numbers to prepend to the BGP AS-path attribute in a matched route. AS-path values in the list must be in the range 1-4294967295; for example, 2000,3000 |
|
String specifying the name of a BGP community list containing BGP Community values to be deleted from matching routes. |
|
BGP community attributes to add to or replace the BGP community attributes in a matching route. Specifying the ‘additive’ attribute is allowed only if one of the other attributes (other than ‘none’) is specified. It causes the specified ‘set community’ attributes to be added to the already existing community attributes in the matching route. If the ‘additive’ attribute is not specified, the previously existing community attributes in the matching route are replaced by the configured ‘set community’ attributes. Specifying a ‘set community’ attribute of ‘none’ is mutually exclusive with setting of other community attributes and causes any community attributes in the matching route to be removed. |
|
A list of one or more BGP community attributes. The allowed values are the following: local_as Do not send outside local AS (well-known community) no_advertise Do not advertise to any peer (well-known community) no_export Do not export to next AS (well-known community) no_peer The route does not need to be advertised to peers. (Advertisement of the route can be suppressed based on other criteria.) additive Add the configured ‘set community’ attributes to the matching route (if set to ‘true’); Previously existing attributes in the matching route are, instead, replaced by the configured attributes if this attribute is not specified or if it is set to ‘false’. none Do not send any community attribute. This attribute is mutually exclusive with all other ‘set community’ attributes. It causes all attributes to be removed from the matching route. none is mutually exclusive with all of the other attributes: local_as, no_advertise, no_export, no_peer, additive, and additive. Choices:
|
|
A list of one or more BGP community numbers in the form AA:NN where AA and NN are integers in the range 0-65535. Note: Each community number in the list must be enclosed in double quotes to avoid YAML parsing errors due to the list values containing an embedded ‘:’ character. |
|
BGP extended community attributes to set into a matching route. |
|
Route Target VPN extended communities in the format ASN:NN or IP-ADDRESS:NN Note: Each rt value in the list must be enclosed in double quotes to avoid YAML parsing errors due to the list values containing an embedded ‘:’ character. |
|
Site-of-Origin VPN extended communities in the format ASN:NN or IP-ADDRESS:NN Note: Each rt value in the list must be enclosed in double quotes to avoid YAML parsing errors due to the list values containing an embedded ‘:’ character. |
|
IPv4 next hop address to set into a matching route in the dotted decimal format A.B.C.D |
|
IPv6 next hop address attributes to set into a matching route |
|
IPv6 global next hop address to set into a matching route in the format A::B |
|
Set the corresponding attribute into a matching route if the value of this Ansible attribute is ‘true’. The attribute indicates that the routing algorithm must prefer the global next-hop address over the link-local address if both exist. Choices:
|
|
BGP local preference path attribute; integer value in the range 0-4294967295 |
|
route metric value actions value and rtt_action are mutually exclusive. |
|
Action to take for modifying the metric for a matched route using the Round Trip Time (rtt);
rtt value.
to the route metric.
subtracted from route metric. Choices:
|
|
metric value to be set into a matching route; value in the range 0-4294967295 |
|
BGP route origin; One of the following must be selected. egp (External; remote EGP) igp (Internal; local IGP) incomplete (Unknown origin) Choices:
|
|
Tag value to be set for a matching route The value must be in the range 1-4294967295 |
|
BGP weight to be set for a matching route: The weight must be an integer in the range 0-4294967295 |
|
Specifies the type of configuration update to be performed on the device. For For For specified items. For module with the specified configuration. Choices:
|
Notes
Note
Supports
check_mode.
Examples
# Using "merged" state to create initial configuration
#
# Before state:
# -------------
#
# sonic# show running-configuration route-map
# sonic#
# (No configuration present)
#
# -------------
#
- name: Merge initial route_maps configuration
dellemc.enterprise_sonic.sonic_route_maps:
config:
- map_name: rm1
action: permit
sequence_num: 80
match:
as_path: bgp_as1
community: bgp_comm_list1
evpn:
default_route: true
vni: 735
ext_comm: bgp_ext_comm1
interface: Ethernet4
ip:
address: ip_pfx_list1
ipv6:
address: ipv6_pfx_list1
local_preference: 8000
metric: 400
origin: egp
peer:
ip: 10.20.30.40
source_protocol: bgp
source_vrf: Vrf1
tag: 7284
set:
as_path_prepend: 200,315,7135
comm_list_delete: bgp_comm_list2
community:
community_number:
- "35:58"
- "79:150"
- "308:650"
community_attributes:
- local_as
- no_advertise
- no_export
- no_peer
- additive
extcommunity:
rt:
- "30:40"
soo:
- "10.73.14.9:78"
ip_next_hop: 10.48.16.18
ipv6_next_hop:
global_addr: 30::30
prefer_global: true
local_preference: 635
metric:
metric_value: 870
origin: egp
weight: 93471
tag: 65
- map_name: rm1
action: deny
sequence_num: 3047
match:
evpn:
route_type: multicast
origin: incomplete
peer:
interface: Ethernet6
source_protocol: ospf
set:
metric:
rtt_action: add
origin: incomplete
- map_name: rm3
action: deny
sequence_num: 285
match:
evpn:
route_type: macip
origin: igp
peer:
ipv6: 87:95:15::53
source_protocol: connected
set:
community:
community_attributes:
- none
metric:
rtt_action: set
origin: igp
call: rm1
- map_name: rm4
action: permit
sequence_num: 480
match:
evpn:
route_type: prefix
source_protocol: static
set:
metric:
rtt_action: subtract
state: merged
# After state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match as-path bgp_as1
# match evpn default-route
# match evpn vni 735
# match ip address prefix-list ip_pfx_list1
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Ethernet4
# match community bgp_comm_list1
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match peer 10.20.30.40
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 200,315,7135
# set community 35:58 79:150 308:650 local-AS no-advertise no-export no-peer additive
# set extcommunity rt 30:40
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric 870
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set ipv6 next-hop prefer-global
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm1 deny 3047
# match evpn route-type multicast
# match peer Ethernet6
# match source-protocol ospf
# match origin incomplete
# set metric +rtt
# set origin incomplete
# !
# route-map rm3 deny 285
# match evpn route-type macip
# call rm1
# match peer 87:95:15::53
# match source-protocol connected
# match origin igp
# set community none
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# ------------
# Using "merged" state to update and add configuration
#
# Before state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match as-path bgp_as1
# match evpn default-route
# match evpn vni 735
# match ip address prefix-list ip_pfx_list1
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Ethernet4
# match community bgp_comm_list1
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match peer 10.20.30.40
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 200,315,7135
# set community 35:58 79:150 308:650 local-AS no-advertise no-export no-peer additive
# set extcommunity rt 30:40
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric 870
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set ipv6 next-hop prefer-global
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm1 deny 3047
# match evpn route-type multicast
# match peer Ethernet6
# match source-protocol ospf
# match origin incomplete
# set metric +rtt
# set origin incomplete
# !
# route-map rm3 deny 285
# match evpn route-type macip
# call rm1
# match peer 87:95:15::53
# match source-protocol connected
# match origin igp
# set community none
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# ------------
#
- name: Merge additional and modified route map configuration
dellemc.enterprise_sonic.sonic_route_maps:
config:
- map_name: rm1
action: permit
sequence_num: 80
match:
as_path: bgp_as2
community: bgp_comm_list3
evpn:
route_type: prefix
vni: 850
interface: Vlan7
ip:
address: ip_pfx_list2
next_hop: ip_pfx_list3
peer:
interface: Portchannel14
set:
as_path_prepend: 188,257
community:
community_number:
- "45:736"
ipv6_next_hop:
prefer_global: false
metric:
rtt_action: add
- map_name: rm1
action: deny
sequence_num: 3047
match:
as_path: bgp_as3
ext_comm: bgp_ext_comm2
origin: igp
set:
metric:
rtt_action: subtract
- map_name: rm2
action: permit
sequence_num: 100
match:
interface: Ethernet16
set:
as_path_prepend: 200,300,400
ipv6_next_hop:
global_addr: 37::58
prefer_global: true
metric: 8000
- map_name: rm3
action: deny
sequence_num: 285
match:
local_preference: 14783
source_protocol: bgp
set:
community:
community_attributes:
- no_advertise
state: merged
# After state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match as-path bgp_as2
# match evpn default-route
# match evpn route-type prefix
# match evpn vni 850
# match ip address prefix-list ip_pfx_list2
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match community bgp_comm_list3
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 188,257
# set community 35:58 79:150 308:650 45:736 local-AS no-advertise no-export no-peer additive
# set extcommunity rt 30:40
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm1 deny 3047
# match as-path bgp_as3
# match evpn route-type multicast
# match ext-community bgp_ext_comm2
# match peer Ethernet6
# match source-protocol ospf
# match origin igp
# set metric -rtt
# set origin incomplete
# !
# route-map rm2 permit 100
# match interface Ethernet16
# set as-path prepend 200,300,400
# set ipv6 next-hop global 37::58
# set ipv6 next-hop prefer-global
# set metric 8000
# !
# route-map rm3 deny 285
# match evpn route-type macip
# match local-preference 14783
# call rm1
# match peer 87:95:15::53
# match source-protocol bgp
# match origin igp
# set community no-advertise
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# Using "replaced" state to replace the contents of a list
#
# Before state:
# ------------
#
# sonic(config-route-map)# do show running-configuration route-map rm1 80
# !
# route-map rm1 permit 80
# match as-path bgp_as2
# match evpn default-route
# match evpn route-type prefix
# match evpn vni 850
# match ip address prefix-list ip_pfx_list2
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match community bgp_comm_list3
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 188,257
# set community 35:58 79:150 308:650 45:736 local-AS no-export no-peer additive
# set extcommunity rt 30:40
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# ------------
- name: Replace a list
dellemc.enterprise_sonic.sonic_route_maps:
config:
- map_name: rm1
action: permit
sequence_num: 80
set:
community:
community_number:
- "15:30"
- "26:54"
state: replaced
# After state:
# ------------
#
# sonic#show running-configuration route-map rm1 80
# !
# route-map rm1 permit 80
# match as-path bgp_as2
# match evpn default-route
# match evpn route-type prefix
# match evpn vni 850
# match ip address prefix-list ip_pfx_list2
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match community bgp_comm_list3
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 188,257
# set community 15:30 26:54 local-AS no-export no-peer additive
# set extcommunity rt 30:40
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# Using "replaced" state to replace the contents of dictionaries
#
# Before state:
# ------------
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match as-path bgp_as2
# match evpn default-route
# match evpn route-type prefix
# match evpn vni 850
# match ip address prefix-list ip_pfx_list2
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match community bgp_comm_list3
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 188,257
# set community 15:30 26:54 local-AS no-export no-peer additive
# set extcommunity rt 30:40
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm1 deny 3047
# match as-path bgp_as3
# match evpn route-type multicast
# match ext-community bgp_ext_comm2
# match peer Ethernet6
# match source-protocol ospf
# match origin igp
# set metric -rtt
# set origin incomplete
# !
# route-map rm2 permit 100
# match interface Ethernet16
# set as-path prepend 200,300,400
# set ipv6 next-hop global 37::58
# set ipv6 next-hop prefer-global
# set metric 8000
# !
# route-map rm3 deny 285
# match evpn route-type macip
# match local-preference 14783
# call rm1
# match peer 87:95:15::53
# match source-protocol bgp
# match origin igp
# set community no-advertise
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# ------------
- name: Replace dictionaries
dellemc.enterprise_sonic.sonic_route_maps:
config:
- map_name: rm1
action: permit
sequence_num: 80
match:
evpn:
route_type: multicast
ip:
address: ip_pfx_list1
set:
community:
community_attributes:
- no_advertise
extcommunity:
rt:
- "20:20"
- map_name: rm2
action: permit
sequence_num: 100
set:
ipv6_next_hop:
global_addr: 45::90
state: replaced
# After state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match as-path bgp_as2
# match evpn route-type multicast
# match ip address prefix-list ip_pfx_list1
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match community bgp_comm_list3
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 188,257
# set community no-advertise
# set extcommunity rt 20:20
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm1 deny 3047
# match as-path bgp_as3
# match evpn route-type multicast
# match ext-community bgp_ext_comm2
# match peer Ethernet6
# match source-protocol ospf
# match origin igp
# set metric -rtt
# set origin incomplete
# !
# route-map rm2 permit 100
# match interface Ethernet16
# set as-path prepend 200,300,400
# set metric 8000
# set ipv6 next-hop global 45::90
# !
# route-map rm3 deny 285
# match evpn route-type macip
# match local-preference 14783
# call rm1
# match peer 87:95:15::53
# match source-protocol bgp
# match origin igp
# set community no-advertise
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# Using "overridden" state to override all existing configuration with new
# configuration
#
# Before state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match as-path bgp_as2
# match evpn route-type multicast
# match ip address prefix-list ip_pfx_list1
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match community bgp_comm_list3
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 188,257
# set community no-advertise
# set extcommunity rt 30:40
# set extcommunity rt 20:20
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm1 deny 3047
# match as-path bgp_as3
# match evpn route-type multicast
# match ext-community bgp_ext_comm2
# match peer Ethernet6
# match source-protocol ospf
# match origin igp
# set metric -rtt
# set origin incomplete
# !
# route-map rm2 permit 100
# match interface Ethernet16
# set as-path prepend 200,300,400
# set metric 8000
# set ipv6 next-hop global 45::90
# !
# route-map rm3 deny 285
# match evpn route-type macip
# match local-preference 14783
# call rm1
# match peer 87:95:15::53
# match source-protocol bgp
# match origin igp
# set community no-advertise
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# ------------
- name: Override all route map configuration with new configuration
dellemc.enterprise_sonic.sonic_route_maps:
config:
- map_name: rm5
action: permit
sequence_num: 250
match:
interface: Ethernet28
set:
as_path_prepend: 150,275
metric: 7249
state: overridden
# After state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm5 permit 250
# match interface Ethernet28
# set as-path prepend 150,275
# set metric 7249
# Using "overridden" state to override all existing configuration with new
# configuration. (Restore previous configuration.)
#
# Before state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm5 permit 250
# match interface Ethernet28
# set as-path prepend 150,275
# set metric 7249
# ------------
- name: Override (restore) all route map configuration with older configuration
dellemc.enterprise_sonic.sonic_route_maps:
config:
- map_name: rm1
action: permit
sequence_num: 80
match:
as_path: bgp_as2
community: bgp_comm_list3
evpn:
default_route: true
route_type: prefix
vni: 850
ext_comm: bgp_ext_comm1
interface: Vlan7
ip:
address: ip_pfx_list2
next_hop: ip_pfx_list3
ipv6:
address: ipv6_pfx_list1
local_preference: 8000
metric: 400
origin: egp
peer:
interface: Portchannel14
source_protocol: bgp
source_vrf: Vrf1
tag: 7284
set:
as_path_prepend: 188,257
comm_list_delete: bgp_comm_list2
community:
community_number:
- "35:58"
- "79:150"
- "308:650"
- "45:736"
community_attributes:
- local_as
- no_export
- no_peer
- additive
extcommunity:
rt:
- "30:40"
soo:
- "10.73.14.9:78"
ip_next_hop: 10.48.16.18
ipv6_next_hop:
global_addr: 30::30
local_preference: 635
metric:
rtt_action: add
origin: egp
weight: 93471
tag: 65
- map_name: rm1
action: deny
sequence_num: 3047
match:
as_path: bgp_as3
evpn:
route_type: multicast
ext_comm: bgp_ext_comm2
origin: igp
peer:
interface: Ethernet6
source_protocol: ospf
set:
metric:
rtt_action: subtract
origin: incomplete
- map_name: rm2
action: permit
sequence_num: 100
match:
interface: Ethernet16
set:
as_path_prepend: 200,300,400
ipv6_next_hop:
global_addr: 37::58
prefer_global: true
metric: 8000
- map_name: rm3
action: deny
sequence_num: 285
match:
evpn:
route_type: macip
origin: igp
peer:
ipv6: 87:95:15::53
local_preference: 14783
source_protocol: bgp
set:
community:
community_attributes:
- no_advertise
metric:
rtt_action: set
origin: igp
call: rm1
- map_name: rm4
action: permit
sequence_num: 480
match:
evpn:
route_type: prefix
source_protocol: static
set:
metric:
rtt_action: subtract
state: overridden
# After state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match as-path bgp_as2
# match evpn default-route
# match evpn route-type prefix
# match evpn vni 850
# match ip address prefix-list ip_pfx_list2
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match community bgp_comm_list3
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 188,257
# set community 35:58 79:150 308:650 45:736 local-AS no-export no-peer additive
# set extcommunity rt 30:40
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm1 deny 3047
# match as-path bgp_as3
# match evpn route-type multicast
# match ext-community bgp_ext_comm2
# match peer Ethernet6
# match source-protocol ospf
# match origin igp
# set metric -rtt
# set origin incomplete
# !
# route-map rm2 permit 100
# match interface Ethernet16
# set as-path prepend 200,300,400
# set ipv6 next-hop global 37::58
# set ipv6 next-hop prefer-global
# set metric 8000
# !
# route-map rm3 deny 285
# match evpn route-type macip
# match local-preference 14783
# call rm1
# match peer 87:95:15::53
# match source-protocol bgp
# match origin igp
# set community no-advertise
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# Using "deleted" state to remove configuration
#
# Before state:
# ------------
#
# sonic# show running-configuration route-map rm1 80
# !
# route-map rm1 permit 80
# match as-path bgp_as2
# match evpn default-route
# match evpn route-type prefix
# match evpn vni 850
# match ip address prefix-list ip_pfx_list2
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match community bgp_comm_list3
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set as-path prepend 188,257
# set community 35:58 79:150 308:650 45:736 local-AS no-export no-peer additive
# set extcommunity rt 30:40
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# ------------
- name: Delete selected route map configuration
dellemc.enterprise_sonic.sonic_route_maps:
config:
- map_name: rm1
action: permit
sequence_num: 80
match:
as_path: bgp_as2
community: bgp_comm_list3
evpn:
vni: 850
ip:
address: ip_pfx_list2
set:
as_path_prepend: 188,257
community:
community_number:
- "35:58"
community_attributes:
- local_as
extcommunity:
rt:
- "30:40"
state: deleted
# After state:
# ------------
#
# sonic# show running-configuration route-map rm1 80
# !
# route-map rm1 permit 80
# match evpn default-route
# match evpn route-type prefix
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set community 79:150 308:650 45:736 no-export no-peer additive
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# Using "deleted" state to remove a route map or route map subset
#
# Before state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match evpn default-route
# match evpn route-type prefix
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set community 79:150 308:650 45:736 no-export no-peer additive
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm1 deny 3047
# match as-path bgp_as3
# match evpn route-type multicast
# match ext-community bgp_ext_comm2
# match peer Ethernet6
# match source-protocol ospf
# match origin igp
# set metric -rtt
# set origin incomplete
# !
# route-map rm2 permit 100
# match interface Ethernet16
# set as-path prepend 200,300,400
# set metric 8000
# set ipv6 next-hop prefer-global
# set ipv6 next-hop global 37::58
# !
# route-map rm3 deny 285
# match evpn route-type macip
# match local-preference 14783
# call rm1
# match peer 87:95:15::53
# match source-protocol bgp
# match origin igp
# set community no-advertise
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# ------------
- name: Delete a route map subset or a route map
dellemc.enterprise_sonic.sonic_route_maps:
config:
- map_name: rm1
sequence_num: 3047
- map_name: rm2
state: deleted
# After state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match evpn default-route
# match evpn route-type prefix
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set community 79:150 308:650 45:736 no-export no-peer additive
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm3 deny 285
# match evpn route-type macip
# match local-preference 14783
# call rm1
# match peer 87:95:15::53
# match source-protocol bgp
# match origin igp
# set community no-advertise
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# Using "deleted" state to remove all route map configuration
#
# Before state:
# ------------
#
# sonic# show running-configuration route-map
# !
# route-map rm1 permit 80
# match evpn default-route
# match evpn route-type prefix
# match ipv6 address prefix-list ipv6_pfx_list1
# match interface Vlan7
# match ext-community bgp_ext_comm1
# match tag 7284
# match local-preference 8000
# match source-vrf Vrf1
# match ip next-hop prefix-list ip_pfx_list3
# match peer PortChannel 14
# match source-protocol bgp
# match metric 400
# match origin egp
# set community 79:150 308:650 45:736 no-export no-peer additive
# set extcommunity soo 10.73.14.9:78
# set comm-list bgp_comm_list2 delete
# set metric +rtt
# set ip next-hop 10.48.16.18
# set ipv6 next-hop global 30::30
# set local-preference 635
# set origin egp
# set weight 93471
# set tag 65
# !
# route-map rm3 deny 285
# match evpn route-type macip
# match local-preference 14783
# call rm1
# match peer 87:95:15::53
# match source-protocol bgp
# match origin igp
# set community no-advertise
# set metric rtt
# set origin igp
# !
# route-map rm4 permit 480
# match evpn route-type prefix
# match source-protocol static
# set metric -rtt
# ------------
- name: Delete all route map configuration
dellemc.enterprise_sonic.sonic_route_maps:
config: []
state: deleted
# After state:
# ------------
#
# sonic# show running-configuration route-map
# sonic#
# (no route map configuration present)
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration module invocation. Returned: when changed Sample: |
|
The generated configuration module invocation. Returned: when Sample: |
|
The configuration prior to the module invocation. Returned: always Sample: |
|
The set of commands pushed to the remote device. Returned: always Sample: |