hitachivantara.vspone_block.sds_block.hv_sds_block_internode_port_facts module – Get internode port from storage system
Note
This module is part of the hitachivantara.vspone_block collection (version 4.3.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install hitachivantara.vspone_block.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: hitachivantara.vspone_block.sds_block.hv_sds_block_internode_port_facts.
New in hitachivantara.vspone_block 4.1.0
Synopsis
Get internode port from storage system.
For examples, go to URL https://github.com/hitachi-vantara/vspone-block-ansible/blob/main/playbooks/sds_block_direct/sdsb_internode_port_facts.yml
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.9
Parameters
Parameter |
Comments |
|---|---|
Information required to establish a connection to the storage system. |
|
IP address or hostname of the storage system. |
|
Type of connection to the storage system. Choices:
|
|
Password for authentication. This is a required field. |
|
Username for authentication. This is a required field. |
|
Specification for retrieving CHAP user information. |
|
Filter internode port by ID (UUID format). |
Attributes
Attribute |
Support |
Description |
|---|---|---|
Support: full |
Determines if the module should run in check mode. |
Examples
- name: Retrieve information about all internode_port
hitachivantara.vspone_block.sds_block.hv_sds_block_internode_port_facts:
connection_info:
address: sdsb.company.com
username: "admin"
password: "password"
- name: Retrieve information about internode_port by specifying id
hitachivantara.vspone_block.sds_block.hv_sds_block_internode_port_facts:
connection_info:
address: sdsb.company.com
username: "admin"
password: "password"
spec:
id: "126f360e-c79e-4e75-8f7c-7d91bfd2f0b8"
Returned Facts
Facts returned by this module are added/updated in the hostvars host facts and can be referenced by name just like any other host fact. They do not need to be registered in order to use them.
Key |
Description |
|---|---|
List of internode port entries. Returned: success |
|
Configured speed setting of the port. Returned: success Sample: |
|
Name of the physical device. Returned: success Sample: |
|
Unique identifier for the internode port. Returned: success Sample: |
|
Interface name of the network device. Returned: success Sample: |
|
IPv4 network configuration. Returned: success |
|
IPv4 address. Returned: success Sample: |
|
Subnet mask. Returned: success Sample: |
|
Whether NIC teaming is enabled. Returned: success Sample: |
|
MAC address of the network interface. Returned: success Sample: |
|
Maximum Transmission Unit size. Returned: success Sample: |
|
Actual speed and duplex setting of the port. Returned: success Sample: |
|
Redundancy level for the port (e.g., 0 for none). Returned: success Sample: |
|
Current operational status of the internode port. Returned: success Sample: |
|
Summary of the control port’s status. Returned: success Sample: |
|
UUID of the storage node associated with this internode port. Returned: success Sample: |
|
Teaming configuration or group info, if any. Returned: success |