hitachivantara.vspone_block.vsp.hv_storage_port_facts module – Retrieves storage port information from Hitachi VSP storage systems.
Note
This module is part of the hitachivantara.vspone_block collection (version 3.4.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install hitachivantara.vspone_block
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: hitachivantara.vspone_block.vsp.hv_storage_port_facts
.
New in hitachivantara.vspone_block 3.0.0
Synopsis
This module retrieves information about storage ports from Hitachi VSP storage systems.
For examples go to URL https://github.com/hitachi-vantara/vspone-block-ansible/blob/main/playbooks/vsp_direct/storage_port_facts.yml
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.8
Parameters
Parameter |
Comments |
---|---|
Information required to establish a connection to the storage system. |
|
IP address or hostname of the storage system. |
|
This field is used to pass the value of the lock token to operate on locked resources. |
|
Type of connection to the storage system. Choices:
|
|
Password for authentication. This is a required field. |
|
Username for authentication. This is a required field. |
|
Specification for the storage port facts to be gathered. |
|
The id of the specific ports to retrieve. |
|
Information about the storage system. This field is an optional field. |
|
The serial number of the storage system. |
Attributes
Attribute |
Support |
Description |
---|---|---|
Support: full |
Determines if the module should run in check mode. |
Examples
- name: Get all ports
hitachivantara.vspone_block.vsp.hv_storage_port_facts:
connection_info:
address: storage1.company.com
username: "admin"
password: "secret"
- name: Get a specific port
hitachivantara.vspone_block.vsp.hv_storage_port_facts:
connection_info:
address: storage1.company.com
username: "admin"
password: "secret"
spec:
ports: ["CLA-1", "CLA-2"]
Returned Facts
Facts returned by this module are added/updated in the hostvars
host facts and can be referenced by name just like any other host fact. They do not need to be registered in order to use them.
Key |
Description |
---|---|
The storage port information. Returned: success |
|
Indicates if the port is in fabric mode. Returned: success Sample: |
|
IPv4 address of the port. Returned: success Sample: |
|
IPv4 gateway address of the port. Returned: success Sample: |
|
IPv4 subnet mask of the port. Returned: success Sample: |
|
iSCSI window size of the port. Returned: success Sample: |
|
Keep alive timer value of the port. Returned: success Sample: |
|
Loop ID of the port. Returned: success Sample: |
|
Indicates if LUN security is enabled. Returned: success Sample: |
|
MAC address of the port. Returned: success Sample: |
|
List of port attributes. Returned: success Sample: |
|
Connection type of the port. Returned: success Sample: |
|
ID of the port. Returned: success Sample: |
|
Mode of the port. Returned: success Sample: |
|
Speed of the port. Returned: success Sample: |
|
Type of the port. Returned: success Sample: |
|
Serial number of the storage system. Returned: success Sample: |
|
TCP port number. Returned: success Sample: |
|
World Wide Name of the port. Returned: success Sample: |