junipernetworks.junos.junos_security_zones module – Manage security zones on Juniper JUNOS devices

Note

This module is part of the junipernetworks.junos collection (version 9.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_security_zones.

New in junipernetworks.junos 2.9.0

Synopsis

  • This module provides declarative management of security zones on Juniper JUNOS devices

Aliases: security_zones

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

  • xmltodict (>=0.12.0)

Parameters

Parameter

Comments

config

dictionary

Dictionary of security zone parameters

functional_zone_management

dictionary

Functional zone to configure host for out of band management interfaces

description

string

Text description of zone

host_inbound_traffic

dictionary

Allowed system services & protocols

protocols

list / elements=dictionary

Protocol type of incoming traffic to accept

except

boolean

Disallow the specified protocol traffic

Choices:

  • false

  • true

name

string

Type of incoming protocol to accept

system_services

list / elements=dictionary

Type of incoming system-service traffic to accept

except

boolean

Disallow the specified incoming system-service traffic

Choices:

  • false

  • true

name

string

Type of incoming system-service traffic to accept

interfaces

list / elements=string

Interfaces that are part of this zone

screen

string

Name of ids option object applied to the zone

zones

list / elements=dictionary

Security zones

address_book

dictionary

Address book entries

address_sets

list / elements=dictionary

Define security address sets

address_sets

list / elements=string

Define an address-set name

addresses

list / elements=string

Addresses to be included in this set

description

string

Text description of address set

name

string

Name of address set

addresses

list / elements=dictionary

Define security addresses

description

string

Text description of address

dns_name

dictionary

DNS address name

ipv4_only

boolean

IPv4 dns address

Choices:

  • false

  • true

ipv6_only

boolean

IPv6 dns address

Choices:

  • false

  • true

name

string

Fully qualified hostname

ip_prefix

string

Numeric IPv4 or IPv6 address with prefix

name

string

Name of address

range_address

dictionary

Address range

from

string

Start of address range

to

string

End of address range

wildcard_address

string

Numeric IPv4 wildcard address with in the form of a.d.d.r/netmask

advance_policy_based_routing_profile

string

Enable Advance Policy Based Routing on this zone

advanced_connection_tracking

dictionary

Enable Advance Policy Based Routing on this zone

mode

string

Set connection tracking mode

Choices:

  • "allow-any-host"

  • "allow-target-host"

  • "allow-target-host-port"

timeout

integer

Timeout value in seconds for advanced-connection-tracking table for this zone

track_all_policies_to_this_zone

boolean

Mandate all policies with to-zone set to this zone to do connection track table lookup

Choices:

  • false

  • true

application_tracking

boolean

Enable Application tracking support for this zone

Choices:

  • false

  • true

description

string

Text description of zone

enable_reverse_reroute

boolean

Enable Reverse route lookup when there is change in ingress interface

Choices:

  • false

  • true

host_inbound_traffic

dictionary

Allowed system services & protocols

protocols

list / elements=dictionary

Protocol type of incoming traffic to accept

except

boolean

Disallow the specified protocol traffic

Choices:

  • false

  • true

name

string

Type of incoming protocol to accept

system_services

list / elements=dictionary

Type of incoming system-service traffic to accept

except

boolean

Disallow the specified incoming system-service traffic

Choices:

  • false

  • true

name

string

Type of incoming system-service traffic to accept

interfaces

list / elements=string

Interfaces that are part of this zone

name

string

Name of the security zone

screen

string

Name of ids option object applied to the zone

source_identity_log

boolean

Show user and group info in session log for this zone

Choices:

  • false

  • true

tcp_rst

boolean

Send RST for NON-SYN packet not matching TCP session

Choices:

  • false

  • true

unidirectional_session_refreshing

boolean

Enable unidirectional session refreshing on this zone

Choices:

  • false

  • true

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the JunOS device by executing the command show security policies.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. behaviour for this module.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show security policies detail executed on device. For state parsed active connection to remote host is not required.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "rendered"

  • "gathered"

  • "parsed"

Notes

Note

  • This module requires the netconf system service be enabled on the device being managed.

  • This module works with connection netconf.

  • See the Junos OS Platform Options.

  • Tested against JunOS v18.4R1

Examples

# Using merged
#
# Before state
# ------------
#
# vagrant@vsrx# show security zones
#
# [edit]
# vagrant@vsrx# show security zones
#
- name: Merge the provided configuration with the exisiting running configuration
  junipernetworks.junos.junos_security_zones: &merged
    config:
      functional_zone_management:
        description: test description
        host_inbound_traffic:
          protocols:
            - name: all
            - name: bgp
              except: true
          system_services:
            - name: all
            - except: true
              name: dhcp
        interfaces:
          - ge-0/0/1.0
          - ge-0/0/2.0
        screen: test_screen
      security_zones:
        - address_book:
            address_sets:
              - addresses:
                  - test_adr1
                  - test_adr2
                name: test_adrset1
              - addresses:
                  - test_adr3
                  - test_adr4
                name: test_adrset2
              - address_sets:
                  - test_adrset1
                  - test_adrset2
                addresses:
                  - test_adr5
                description: test description
                name: test_adrset3
            addresses:
              - description: test desc
                ip_prefix: 10.0.0.0/24
                name: test_adr1
              - dns_name:
                  ipv6_only: true
                  name: 1.1.1.1
                name: test_adr2
              - name: test_adr3
                range_address:
                  from: 10.2.0.1
                  to: 10.2.0.2
              - name: test_adr4
                wildcard_address: 10.3.0.1/24
              - description: test desc
                ip_prefix: 10.1.0.0/24
                name: test_adr5
          advance_policy_based_routing_profile: test_profile
          application_tracking: true
          description: test description
          enable_reverse_reroute: true
          host_inbound_traffic:
            protocols:
              - name: all
              - except: true
                name: bgp
            system_services:
              - name: all
              - except: true
                name: dhcp
          interfaces:
            - ge-0/0/3.0
            - ge-0/0/4.0
          name: test_sec_zone1
          screen: test_screen
          source_identity_log: true
          tcp_rst: true
    state: merged
#
# -------------------------
# Module Execution Result
# -------------------------
#   "after": {
#     "functional_zone_management": {
#         "description": "test description",
#         "host_inbound_traffic": {
#             "protocols": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "bgp"
#                 }
#             ],
#             "system_services": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "dhcp"
#                 }
#             ]
#         },
#         "interfaces": [
#             "ge-0/0/1.0",
#             "ge-0/0/2.0"
#         ],
#         "screen": "test_screen"
#     },
#     "security_zones": [
#         {
#             "address_book": {
#                 "address_sets": [
#                     {
#                         "addresses": [
#                             "test_adr1",
#                             "test_adr2"
#                         ],
#                         "name": "test_adrset1"
#                     },
#                     {
#                         "addresses": [
#                             "test_adr3",
#                             "test_adr4"
#                         ],
#                         "name": "test_adrset2"
#                     },
#                     {
#                         "address_sets": [
#                             "test_adrset1",
#                             "test_adrset2"
#                         ],
#                         "addresses": [
#                             "test_adr5"
#                         ],
#                         "description": "test description",
#                         "name": "test_adrset3"
#                     }
#                 ],
#                 "addresses": [
#                     {
#                         "description": "test desc",
#                         "ip_prefix": "10.0.0.0/24",
#                         "name": "test_adr1"
#                     },
#                     {
#                         "dns_name": {
#                             "ipv6_only": true,
#                             "name": "1.1.1.1"
#                         },
#                         "name": "test_adr2"
#                     },
#                     {
#                         "name": "test_adr3",
#                         "range_address": {
#                             "from": "10.2.0.1",
#                             "to": "10.2.0.2"
#                         }
#                     },
#                     {
#                         "name": "test_adr4",
#                         "wildcard_address": "10.3.0.1/24"
#                     },
#                     {
#                         "description": "test desc",
#                         "ip_prefix": "10.1.0.0/24",
#                         "name": "test_adr5"
#                     }
#                 ]
#             },
#             "advance_policy_based_routing_profile": "test_profile",
#             "application_tracking": true,
#             "description": "test description",
#             "enable_reverse_reroute": true,
#             "host_inbound_traffic": {
#                 "protocols": [
#                     {
#                         "name": "all"
#                     },
#                     {
#                         "except": true,
#                         "name": "bgp"
#                     }
#                 ],
#                 "system_services": [
#                     {
#                         "name": "all"
#                     },
#                     {
#                         "except": true,
#                         "name": "dhcp"
#                     }
#                 ]
#             },
#             "interfaces": [
#                 "ge-0/0/3.0",
#                 "ge-0/0/4.0"
#             ],
#             "name": "test_sec_zone1",
#             "screen": "test_screen",
#             "source_identity_log": true,
#             "tcp_rst": true
#         }
#     ]
# },
# "before": {},
# "changed": true,
# "commands":
# '<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:zones><nc:functional-zone><nc:management><nc:description>t'
# 'est description</nc:description><nc:host-inbound-traffic><nc:protocols><nc:name>all</nc:name></nc:protocols><nc:protocols><nc:na'
# 'me>bgp</nc:name><nc:except/></nc:protocols><nc:system-services><nc:name>all</nc:name></nc:system-services><nc:system-services><n'
# 'c:name>dhcp</nc:name><nc:except/></nc:system-services></nc:host-inbound-traffic><nc:interfaces><nc:name>ge-0/0/1.0</nc:name></nc'
# ':interfaces><nc:interfaces><nc:name>ge-0/0/2.0</nc:name></nc:interfaces><nc:screen>test_screen</nc:screen></nc:management></nc:f'
# 'unctional-zone><nc:security-zone><nc:name>test_sec_zone1</nc:name><nc:address-book><nc:address><nc:name>test_adr1</nc:name><nc:i'
# 'p-prefix>10.0.0.0/24</nc:ip-prefix><nc:description>test desc</nc:description></nc:address><nc:address><nc:name>test_adr2</nc:nam'
# 'e><nc:dns-name><nc:name>1.1.1.1</nc:name><nc:ipv6-only/></nc:dns-name></nc:address><nc:address><nc:name>test_adr3</nc:name><nc:r'
# 'ange-address><nc:name>10.2.0.1</nc:name><nc:to><nc:range-high>10.2.0.2</nc:range-high></nc:to></nc:range-address></nc:address><n'
# 'c:address><nc:name>test_adr4</nc:name><nc:wildcard-address><nc:name>10.3.0.1/24</nc:name></nc:wildcard-address></nc:address><nc:'
# 'address><nc:name>test_adr5</nc:name><nc:ip-prefix>10.1.0.0/24</nc:ip-prefix><nc:description>test desc</nc:description></nc:addre'
# 'ss><nc:address-set><nc:name>test_adrset1</nc:name><nc:address><nc:name>test_adr1</nc:name></nc:address><nc:address><nc:name>test'
# '_adr2</nc:name></nc:address></nc:address-set><nc:address-set><nc:name>test_adrset2</nc:name><nc:address><nc:name>test_adr3</nc:n'
# 'ame></nc:address><nc:address><nc:name>test_adr4</nc:name></nc:address></nc:address-set><nc:address-set><nc:name>test_adrset3</nc'
# ':name><nc:address><nc:name>test_adr5</nc:name></nc:address><nc:address-set><nc:name>test_adrset1</nc:name></nc:address-set><nc:a'
# 'ddress-set><nc:name>test_adrset2</nc:name></nc:address-set><nc:description>test description</nc:description></nc:address-set></n'
# 'c:address-book><nc:advance-policy-based-routing-profile><nc:profile>test_profile</nc:profile></nc:advance-policy-based-routing-p'
# 'rofile><nc:application-tracking/><nc:description>test description</nc:description><nc:enable-reverse-reroute/><nc:host-inbound-t'
# 'raffic><nc:protocols><nc:name>all</nc:name></nc:protocols><nc:protocols><nc:name>bgp</nc:name><nc:except/></nc:protocols><nc:sys'
# 'tem-services><nc:name>all</nc:name></nc:system-services><nc:system-services><nc:name>dhcp</nc:name><nc:except/></nc:system-servi'
# 'ces></nc:host-inbound-traffic><nc:interfaces><nc:name>ge-0/0/3.0</nc:name></nc:interfaces><nc:interfaces><nc:name>ge-0/0/4.0</nc'
# ':name></nc:interfaces><nc:screen>test_screen</nc:screen><nc:source-identity-log/><nc:tcp-rst/></nc:security-zone></nc:zones></nc'
# ':security>'

# After state
# -----------
#
# vagrant@vsrx# show system ntp
# functional-zone management {
#     interfaces {
#         ge-0/0/1.0;
#         ge-0/0/2.0;
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     description "test description";
# }
# security-zone test_sec_zone1 {
#     description "test description";
#     tcp-rst;
#     address-book {
#         address test_adr1 {
#             description "test desc";
#             10.0.0.0/24;
#         }
#         address test_adr2 {
#             dns-name 1.1.1.1 {
#                 ipv6-only;
#             }
#         }
#         address test_adr3 {
#             range-address 10.2.0.1 {
#                 to {
#                     10.2.0.2;
#                 }
#             }
#         }
#         address test_adr4 {
#             wildcard-address 10.3.0.1/24;
#         }
#         address test_adr5 {
#             description "test desc";
#             10.1.0.0/24;
#         }
#         address-set test_adrset1 {
#             address test_adr1;
#             address test_adr2;
#         }
#         address-set test_adrset2 {
#             address test_adr3;
#             address test_adr4;
#         }
#         address-set test_adrset3 {
#             description "test description";
#             address test_adr5;
#             address-set test_adrset1;
#             address-set test_adrset2;
#         }
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     interfaces {
#         ge-0/0/3.0;
#         ge-0/0/4.0;
#     }
#     application-tracking;
#     source-identity-log;
#     advance-policy-based-routing-profile {
#         test_profile;
#     }
#     enable-reverse-reroute;
# }
#
#
# Using Replaced
# Before state
# ------------
#
# vagrant@vsrx# show security zones
# functional-zone management {
#     interfaces {
#         ge-0/0/1.0;
#         ge-0/0/2.0;
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     description "test description";
# }
# security-zone test_sec_zone1 {
#     description "test description";
#     tcp-rst;
#     address-book {
#         address test_adr1 {
#             description "test desc";
#             10.0.0.0/24;
#         }
#         address test_adr2 {
#             dns-name 1.1.1.1 {
#                 ipv6-only;
#             }
#         }
#         address test_adr3 {
#             range-address 10.2.0.1 {
#                 to {
#                     10.2.0.2;
#                 }
#             }
#         }
#         address test_adr4 {
#             wildcard-address 10.3.0.1/24;
#         }
#         address test_adr5 {
#             description "test desc";
#             10.1.0.0/24;
#         }
#         address-set test_adrset1 {
#             address test_adr1;
#             address test_adr2;
#         }
#         address-set test_adrset2 {
#             address test_adr3;
#             address test_adr4;
#         }
#         address-set test_adrset3 {
#             description "test description";
#             address test_adr5;
#             address-set test_adrset1;
#             address-set test_adrset2;
#         }
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     interfaces {
#         ge-0/0/3.0;
#         ge-0/0/4.0;
#     }
#     application-tracking;
#     source-identity-log;
#     advance-policy-based-routing-profile {
#         test_profile;
#     }
#     enable-reverse-reroute;
# }
#
#

- name: Replaced running security zones configuration with provided configuration
  junipernetworks.junos.junos_security_zones:
    config:
      functional_zone_management:
        description: test description
        host_inbound_traffic:
          protocols:
            - name: all
            - name: bgp
              except: true
          system_services:
            - name: all
            - except: true
              name: dhcp
          interfaces:
            - ge-0/0/1.0
            - ge-0/0/2.0
        screen: test_screen
    state: replaced
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
#     "functional_zone_management": {
#         "description": "test description",
#         "host_inbound_traffic": {
#             "protocols": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "bgp"
#                 }
#             ],
#             "system_services": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "dhcp"
#                 }
#             ]
#         },
#         "interfaces": [
#             "ge-0/0/1.0",
#             "ge-0/0/2.0"
#         ],
#         "screen": "test_screen"
#     }
# },
# "before": {
#     "functional_zone_management": {
#         "description": "test description",
#         "host_inbound_traffic": {
#             "protocols": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "bgp"
#                 }
#             ],
#             "system_services": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "dhcp"
#                 }
#             ]
#         },
#         "interfaces": [
#             "ge-0/0/1.0",
#             "ge-0/0/2.0"
#         ],
#         "screen": "test_screen"
#     },
#     "security_zones": [
#         {
#             "address_book": {
#                 "address_sets": [
#                     {
#                         "addresses": [
#                             "test_adr1",
#                             "test_adr2"
#                         ],
#                         "name": "test_adrset1"
#                     },
#                     {
#                         "addresses": [
#                             "test_adr3",
#                             "test_adr4"
#                         ],
#                         "name": "test_adrset2"
#                     },
#                     {
#                         "address_sets": [
#                             "test_adrset1",
#                             "test_adrset2"
#                         ],
#                         "addresses": [
#                             "test_adr5"
#                         ],
#                         "description": "test description",
#                         "name": "test_adrset3"
#                     }
#                 ],
#                 "addresses": [
#                     {
#                         "description": "test desc",
#                         "ip_prefix": "10.0.0.0/24",
#                         "name": "test_adr1"
#                     },
#                     {
#                         "dns_name": {
#                             "ipv6_only": true,
#                             "name": "1.1.1.1"
#                         },
#                         "name": "test_adr2"
#                     },
#                     {
#                         "name": "test_adr3",
#                         "range_address": {
#                             "from": "10.2.0.1",
#                             "to": "10.2.0.2"
#                         }
#                     },
#                     {
#                         "name": "test_adr4",
#                         "wildcard_address": "10.3.0.1/24"
#                     },
#                     {
#                         "description": "test desc",
#                         "ip_prefix": "10.1.0.0/24",
#                         "name": "test_adr5"
#                     }
#                 ]
#             },
#             "advance_policy_based_routing_profile": "test_profile",
#             "application_tracking": true,
#             "description": "test description",
#             "enable_reverse_reroute": true,
#             "host_inbound_traffic": {
#                 "protocols": [
#                     {
#                         "name": "all"
#                     },
#                     {
#                         "except": true,
#                         "name": "bgp"
#                     }
#                 ],
#                 "system_services": [
#                     {
#                         "name": "all"
#                     },
#                     {
#                         "except": true,
#                         "name": "dhcp"
#                     }
#                 ]
#             },
#             "interfaces": [
#                 "ge-0/0/3.0",
#                 "ge-0/0/4.0"
#             ],
#             "name": "test_sec_zone1",
#             "screen": "test_screen",
#             "source_identity_log": true,
#             "tcp_rst": true
#         }
#     ]
# },
# "changed": true,
# "commands":
# '<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:zones delete="delete"/><nc:zones><nc:functional-zone><nc'
# ':management><nc:description>test description</nc:description><nc:host-inbound-traffic><nc:protocols><nc:name>all</nc:name></nc:p'
# 'rotocols><nc:protocols><nc:name>bgp</nc:name><nc:except/></nc:protocols><nc:system-services><nc:name>all</nc:name></nc:system-se'
# 'rvices><nc:system-services><nc:name>dhcp</nc:name><nc:except/></nc:system-services></nc:host-inbound-traffic><nc:interfaces><nc:'
# 'name>ge-0/0/1.0</nc:name></nc:interfaces><nc:interfaces><nc:name>ge-0/0/2.0</nc:name></nc:interfaces><nc:screen>test_screen</nc:'
# 'screen></nc:management></nc:functional-zone></nc:zones></nc:security>'
#
#
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# functional-zone management {
#     interfaces {
#         ge-0/0/1.0;
#         ge-0/0/2.0;
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     description "test description";
# }
#
#
# Using overridden
#
# Before state
# ------------
#
# vagrant@vsrx# show security zones
# functional-zone management {
#     interfaces {
#         ge-0/0/1.0;
#         ge-0/0/2.0;
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     description "test description";
# }
# security-zone test_sec_zone1 {
#     description "test description";
#     tcp-rst;
#     address-book {
#         address test_adr1 {
#             description "test desc";
#             10.0.0.0/24;
#         }
#         address test_adr2 {
#             dns-name 1.1.1.1 {
#                 ipv6-only;
#             }
#         }
#         address test_adr3 {
#             range-address 10.2.0.1 {
#                 to {
#                     10.2.0.2;
#                 }
#             }
#         }
#         address test_adr4 {
#             wildcard-address 10.3.0.1/24;
#         }
#         address test_adr5 {
#             description "test desc";
#             10.1.0.0/24;
#         }
#         address-set test_adrset1 {
#             address test_adr1;
#             address test_adr2;
#         }
#         address-set test_adrset2 {
#             address test_adr3;
#             address test_adr4;
#         }
#         address-set test_adrset3 {
#             description "test description";
#             address test_adr5;
#             address-set test_adrset1;
#             address-set test_adrset2;
#         }
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     interfaces {
#         ge-0/0/3.0;
#         ge-0/0/4.0;
#     }
#     application-tracking;
#     source-identity-log;
#     advance-policy-based-routing-profile {
#         test_profile;
#     }
#     enable-reverse-reroute;
# }
#
#

- name: Override running security zones configuration with provided configuration
  junipernetworks.junos.junos_security_zones:
    config:
      functional_zone_management:
        description: test description
        host_inbound_traffic:
          protocols:
            - name: all
            - name: bgp
              except: true
          system_services:
            - name: all
            - except: true
              name: dhcp
        interfaces:
          - ge-0/0/1.0
          - ge-0/0/2.0
        screen: test_screen
    state: overridden
#
# -------------------------
# Module Execution Result
# -------------------------
# "after": {
#     "functional_zone_management": {
#         "description": "test description",
#         "host_inbound_traffic": {
#             "protocols": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "bgp"
#                 }
#             ],
#             "system_services": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "dhcp"
#                 }
#             ]
#         },
#         "interfaces": [
#             "ge-0/0/1.0",
#             "ge-0/0/2.0"
#         ],
#         "screen": "test_screen"
#     }
# },
# "before": {
#     "functional_zone_management": {
#         "description": "test description",
#         "host_inbound_traffic": {
#             "protocols": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "bgp"
#                 }
#             ],
#             "system_services": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "dhcp"
#                 }
#             ]
#         },
#         "interfaces": [
#             "ge-0/0/1.0",
#             "ge-0/0/2.0"
#         ],
#         "screen": "test_screen"
#     },
#     "security_zones": [
#         {
#             "address_book": {
#                 "address_sets": [
#                     {
#                         "addresses": [
#                             "test_adr1",
#                             "test_adr2"
#                         ],
#                         "name": "test_adrset1"
#                     },
#                     {
#                         "addresses": [
#                             "test_adr3",
#                             "test_adr4"
#                         ],
#                         "name": "test_adrset2"
#                     },
#                     {
#                         "address_sets": [
#                             "test_adrset1",
#                             "test_adrset2"
#                         ],
#                         "addresses": [
#                             "test_adr5"
#                         ],
#                         "description": "test description",
#                         "name": "test_adrset3"
#                     }
#                 ],
#                 "addresses": [
#                     {
#                         "description": "test desc",
#                         "ip_prefix": "10.0.0.0/24",
#                         "name": "test_adr1"
#                     },
#                     {
#                         "dns_name": {
#                             "ipv6_only": true,
#                             "name": "1.1.1.1"
#                         },
#                         "name": "test_adr2"
#                     },
#                     {
#                         "name": "test_adr3",
#                         "range_address": {
#                             "from": "10.2.0.1",
#                             "to": "10.2.0.2"
#                         }
#                     },
#                     {
#                         "name": "test_adr4",
#                         "wildcard_address": "10.3.0.1/24"
#                     },
#                     {
#                         "description": "test desc",
#                         "ip_prefix": "10.1.0.0/24",
#                         "name": "test_adr5"
#                     }
#                 ]
#             },
#             "advance_policy_based_routing_profile": "test_profile",
#             "application_tracking": true,
#             "description": "test description",
#             "enable_reverse_reroute": true,
#             "host_inbound_traffic": {
#                 "protocols": [
#                     {
#                         "name": "all"
#                     },
#                     {
#                         "except": true,
#                         "name": "bgp"
#                     }
#                 ],
#                 "system_services": [
#                     {
#                         "name": "all"
#                     },
#                     {
#                         "except": true,
#                         "name": "dhcp"
#                     }
#                 ]
#             },
#             "interfaces": [
#                 "ge-0/0/3.0",
#                 "ge-0/0/4.0"
#             ],
#             "name": "test_sec_zone1",
#             "screen": "test_screen",
#             "source_identity_log": true,
#             "tcp_rst": true
#         }
#     ]
# },
# "changed": true,
# "commands":
# '<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:zones delete="delete"/><nc:zones><nc:functional-zone><nc'
# ':management><nc:description>test description</nc:description><nc:host-inbound-traffic><nc:protocols><nc:name>all</nc:name></nc:p'
# 'rotocols><nc:protocols><nc:name>bgp</nc:name><nc:except/></nc:protocols><nc:system-services><nc:name>all</nc:name></nc:system-se'
# 'rvices><nc:system-services><nc:name>dhcp</nc:name><nc:except/></nc:system-services></nc:host-inbound-traffic><nc:interfaces><nc:'
# 'name>ge-0/0/1.0</nc:name></nc:interfaces><nc:interfaces><nc:name>ge-0/0/2.0</nc:name></nc:interfaces><nc:screen>test_screen</nc:'
# 'screen></nc:management></nc:functional-zone></nc:zones></nc:security>'
#
#
# After state
# -----------
#
# vagrant@vsrx# show system ntp
# functional-zone management {
#     interfaces {
#         ge-0/0/1.0;
#         ge-0/0/2.0;
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     description "test description";
# }
#
#
# Using deleted
#
# Before state
# ------------
#
# vagrant@vsrx# show security zones
# functional-zone management {
#     interfaces {
#         ge-0/0/1.0;
#         ge-0/0/2.0;
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     description "test description";
# }
#
#
- name: Delete running security zones configuration
  junipernetworks.junos.junos_security_zones:
    config:
    state: deleted
#
# -------------------------
# Module Execution Result
# -------------------------
#     "after": {},
#     "before": {
#     "functional_zone_management": {
#         "description": "test description",
#         "host_inbound_traffic": {
#             "protocols": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "bgp"
#                 }
#             ],
#             "system_services": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "dhcp"
#                 }
#             ]
#         },
#         "interfaces": [
#             "ge-0/0/1.0",
#             "ge-0/0/2.0"
#         ],
#         "screen": "test_screen"
#     }
# },
# "changed": true,
# "commands":
#   "<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#   "<nc:zones delete="delete"/></nc:security>"
#
#
# After state
# -----------
#
# vagrant@vsrx# show security zones
#
# [edit]
# Using gathered
#
# Before state
# ------------
#
# vagrant@vsrx# show system ntp
# functional-zone management {
#     interfaces {
#         ge-0/0/1.0;
#         ge-0/0/2.0;
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     description "test description";
# }
# security-zone test_sec_zone1 {
#     description "test description";
#     tcp-rst;
#     address-book {
#         address test_adr1 {
#             description "test desc";
#             10.0.0.0/24;
#         }
#         address test_adr2 {
#             dns-name 1.1.1.1 {
#                 ipv6-only;
#             }
#         }
#         address test_adr3 {
#             range-address 10.2.0.1 {
#                 to {
#                     10.2.0.2;
#                 }
#             }
#         }
#         address test_adr4 {
#             wildcard-address 10.3.0.1/24;
#         }
#         address test_adr5 {
#             description "test desc";
#             10.1.0.0/24;
#         }
#         address-set test_adrset1 {
#             address test_adr1;
#             address test_adr2;
#         }
#         address-set test_adrset2 {
#             address test_adr3;
#             address test_adr4;
#         }
#         address-set test_adrset3 {
#             description "test description";
#             address test_adr5;
#             address-set test_adrset1;
#             address-set test_adrset2;
#         }
#     }
#     screen test_screen;
#     host-inbound-traffic {
#         system-services {
#             all;
#             dhcp {
#                 except;
#             }
#         }
#         protocols {
#             all;
#             bgp {
#                 except;
#             }
#         }
#     }
#     interfaces {
#         ge-0/0/3.0;
#         ge-0/0/4.0;
#     }
#     application-tracking;
#     source-identity-log;
#     advance-policy-based-routing-profile {
#         test_profile;
#     }
#     enable-reverse-reroute;
# }
- name: Gather running security zones configuration
  junipernetworks.junos.junos_security_zones:
    state: gathered
#
# -------------------------
# Module Execution Result
# -------------------------
# "gathered": {
#     "functional_zone_management": {
#         "description": "test description",
#         "host_inbound_traffic": {
#             "protocols": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "bgp"
#                 }
#             ],
#             "system_services": [
#                 {
#                     "name": "all"
#                 },
#                 {
#                     "except": true,
#                     "name": "dhcp"
#                 }
#             ]
#         },
#         "interfaces": [
#             "ge-0/0/1.0",
#             "ge-0/0/2.0"
#         ],
#         "screen": "test_screen"
#     },
#     "security_zones": [
#         {
#             "address_book": {
#                 "address_sets": [
#                     {
#                         "addresses": [
#                             "test_adr1",
#                             "test_adr2"
#                         ],
#                         "name": "test_adrset1"
#                     },
#                     {
#                         "addresses": [
#                             "test_adr3",
#                             "test_adr4"
#                         ],
#                         "name": "test_adrset2"
#                     },
#                     {
#                         "address_sets": [
#                             "test_adrset1",
#                             "test_adrset2"
#                         ],
#                         "addresses": [
#                             "test_adr5"
#                         ],
#                         "description": "test description",
#                         "name": "test_adrset3"
#                     }
#                 ],
#                 "addresses": [
#                     {
#                         "description": "test desc",
#                         "ip_prefix": "10.0.0.0/24",
#                         "name": "test_adr1"
#                     },
#                     {
#                         "dns_name": {
#                             "ipv6_only": true,
#                             "name": "1.1.1.1"
#                         },
#                         "name": "test_adr2"
#                     },
#                     {
#                         "name": "test_adr3",
#                         "range_address": {
#                             "from": "10.2.0.1",
#                             "to": "10.2.0.2"
#                         }
#                     },
#                     {
#                         "name": "test_adr4",
#                         "wildcard_address": "10.3.0.1/24"
#                     },
#                     {
#                         "description": "test desc",
#                         "ip_prefix": "10.1.0.0/24",
#                         "name": "test_adr5"
#                     }
#                 ]
#             },
#             "advance_policy_based_routing_profile": "test_profile",
#             "application_tracking": true,
#             "description": "test description",
#             "enable_reverse_reroute": true,
#             "host_inbound_traffic": {
#                 "protocols": [
#                     {
#                         "name": "all"
#                     },
#                     {
#                         "except": true,
#                         "name": "bgp"
#                     }
#                 ],
#                 "system_services": [
#                     {
#                         "name": "all"
#                     },
#                     {
#                         "except": true,
#                         "name": "dhcp"
#                     }
#                 ]
#             },
#             "interfaces": [
#                 "ge-0/0/3.0",
#                 "ge-0/0/4.0"
#             ],
#             "name": "test_sec_zone1",
#             "screen": "test_screen",
#             "source_identity_log": true,
#             "tcp_rst": true
#         }
#     ]
# }
# "changed": false,
#
#
# Using rendered
#
# Before state
# ------------
#
- name: Render xml for provided facts.
  junipernetworks.junos.junos_security_zones:
    config:
      functional_zone_management:
        description: test description
        host_inbound_traffic:
          protocols:
            - name: all
            - name: bgp
              except: true
          system_services:
            - name: all
            - except: true
              name: dhcp
        interfaces:
          - ge-0/0/1.0
          - ge-0/0/2.0
        screen: test_screen
      security_zones:
        - address_book:
            address_sets:
              - addresses:
                  - test_adr1
                  - test_adr2
                name: test_adrset1
              - addresses:
                  - test_adr3
                  - test_adr4
                name: test_adrset2
              - address_sets:
                  - test_adrset1
                  - test_adrset2
              - addresses:
                  - test_adr5
                description: test description
                name: test_adrset3
            addresses:
              - description: test desc
                ip_prefix: 10.0.0.0/24
                name: test_adr1
              - dns_name:
                  ipv6_only: true
                  name: 1.1.1.1
                name: test_adr2
              - name: test_adr3
                range_address:
                  from: 10.2.0.1
                  to: 10.2.0.2
              - name: test_adr4
                wildcard_address: 10.3.0.1/24
              - description: test desc
                ip_prefix: 10.1.0.0/24
                name: test_adr5
          advance_policy_based_routing_profile: test_profile
          application_tracking: true
          description: test description
          enable_reverse_reroute: true
          host_inbound_traffic:
            protocols:
              - name: all
              - except: true
                name: bgp
            system_services:
              - name: all
              - except: true
                name: dhcp
          interfaces:
            - ge-0/0/3.0
            - ge-0/0/4.0
          name: test_sec_zone1
          screen: test_screen
          source_identity_log: true
          tcp_rst: true
    state: rendered
#
# -------------------------
# Module Execution Result
# -------------------------
# "rendered":
# '<nc:security xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:zones><nc:functional-zone><nc:management><nc:description>t'
# 'est description</nc:description><nc:host-inbound-traffic><nc:protocols><nc:name>all</nc:name></nc:protocols><nc:protocols><nc:na'
# 'me>bgp</nc:name><nc:except/></nc:protocols><nc:system-services><nc:name>all</nc:name></nc:system-services><nc:system-services><n'
# 'c:name>dhcp</nc:name><nc:except/></nc:system-services></nc:host-inbound-traffic><nc:interfaces><nc:name>ge-0/0/1.0</nc:name></nc'
# ':interfaces><nc:interfaces><nc:name>ge-0/0/2.0</nc:name></nc:interfaces><nc:screen>test_screen</nc:screen></nc:management></nc:f'
# 'unctional-zone><nc:security-zone><nc:name>test_sec_zone1</nc:name><nc:address-book><nc:address><nc:name>test_adr1</nc:name><nc:i'
# 'p-prefix>10.0.0.0/24</nc:ip-prefix><nc:description>test desc</nc:description></nc:address><nc:address><nc:name>test_adr2</nc:nam'
# 'e><nc:dns-name><nc:name>1.1.1.1</nc:name><nc:ipv6-only/></nc:dns-name></nc:address><nc:address><nc:name>test_adr3</nc:name><nc:r'
# 'ange-address><nc:name>10.2.0.1</nc:name><nc:to><nc:range-high>10.2.0.2</nc:range-high></nc:to></nc:range-address></nc:address><n'
# 'c:address><nc:name>test_adr4</nc:name><nc:wildcard-address><nc:name>10.3.0.1/24</nc:name></nc:wildcard-address></nc:address><nc:'
# 'address><nc:name>test_adr5</nc:name><nc:ip-prefix>10.1.0.0/24</nc:ip-prefix><nc:description>test desc</nc:description></nc:addre'
# 'ss><nc:address-set><nc:name>test_adrset1</nc:name><nc:address><nc:name>test_adr1</nc:name></nc:address><nc:address><nc:name>test'
# '_adr2</nc:name></nc:address></nc:address-set><nc:address-set><nc:name>test_adrset2</nc:name><nc:address><nc:name>test_adr3</nc:n'
# 'ame></nc:address><nc:address><nc:name>test_adr4</nc:name></nc:address></nc:address-set><nc:address-set><nc:name>test_adrset3</nc'
# ':name><nc:address><nc:name>test_adr5</nc:name></nc:address><nc:address-set><nc:name>test_adrset1</nc:name></nc:address-set><nc:a'
# 'ddress-set><nc:name>test_adrset2</nc:name></nc:address-set><nc:description>test description</nc:description></nc:address-set></n'
# 'c:address-book><nc:advance-policy-based-routing-profile><nc:profile>test_profile</nc:profile></nc:advance-policy-based-routing-p'
# 'rofile><nc:application-tracking/><nc:description>test description</nc:description><nc:enable-reverse-reroute/><nc:host-inbound-t'
# 'raffic><nc:protocols><nc:name>all</nc:name></nc:protocols><nc:protocols><nc:name>bgp</nc:name><nc:except/></nc:protocols><nc:sys'
# 'tem-services><nc:name>all</nc:name></nc:system-services><nc:system-services><nc:name>dhcp</nc:name><nc:except/></nc:system-servi'
# 'ces></nc:host-inbound-traffic><nc:interfaces><nc:name>ge-0/0/3.0</nc:name></nc:interfaces><nc:interfaces><nc:name>ge-0/0/4.0</nc'
# ':name></nc:interfaces><nc:screen>test_screen</nc:screen><nc:source-identity-log/><nc:tcp-rst/></nc:security-zone></nc:zones></nc'
# ':security>'
#
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <security>
#             <zones>
#                 <functional-zone>
#                     <management>
#                         <description>test description</description>
#                         <host-inbound-traffic>
#                             <protocols>
#                                 <name>all</name>
#                             </protocols>
#                             <protocols>
#                                 <name>bgp</name>
#                                 <except />
#                             </protocols>
#                             <system-services>
#                                 <name>all</name>
#                             </system-services>
#                             <system-services>
#                                 <name>dhcp</name>
#                                 <except />
#                             </system-services>
#                         </host-inbound-traffic>
#                         <interfaces>
#                             <name>ge-0/0/1.0</name>
#                         </interfaces>
#                         <interfaces>
#                             <name>ge-0/0/2.0</name>
#                         </interfaces>
#                         <screen>test_screen</screen>
#                     </management>
#                 </functional-zone>
#                 <security-zone>
#                     <name>test_sec_zone1</name>
#                     <address-book>
#                         <address>
#                             <name>test_adr1</name>
#                             <ip-prefix>10.0.0.0/24</ip-prefix>
#                             <description>test desc</description>
#                         </address>
#                         <address>
#                             <name>test_adr2</name>
#                             <dns-name>
#                                 <name>1.1.1.1</name>
#                                 <ipv6-only />
#                             </dns-name>
#                         </address>
#                         <address>
#                             <name>test_adr3</name>
#                             <range-address>
#                                 <name>10.2.0.1</name>
#                                 <to>
#                                     <range-high>10.2.0.2</range-high>
#                                 </to>
#                             </range-address>
#                         </address>
#                         <address>
#                             <name>test_adr4</name>
#                             <wildcard-address>
#                                 <name>10.3.0.1/24</name>
#                             </wildcard-address>
#                         </address>
#                         <address>
#                             <name>test_adr5</name>
#                             <ip-prefix>10.1.0.0/24</ip-prefix>
#                             <description>test desc</description>
#                         </address>
#                         <address-set>
#                             <name>test_adrset1</name>
#                             <address>
#                                 <name>test_adr1</name>
#                             </address>
#                             <address>
#                                 <name>test_adr2</name>
#                             </address>
#                         </address-set>
#                         <address-set>
#                             <name>test_adrset2</name>
#                             <address>
#                                 <name>test_adr3</name>
#                             </address>
#                             <address>
#                                 <name>test_adr4</name>
#                             </address>
#                         </address-set>
#                         <address-set>
#                             <name>test_adrset3</name>
#                             <address>
#                                 <name>test_adr5</name>
#                             </address>
#                             <address-set>
#                                 <name>test_adrset1</name>
#                             </address-set>
#                             <address-set>
#                                 <name>test_adrset2</name>
#                             </address-set>
#                             <description>test description</description>
#                         </address-set>
#                     </address-book>
#                     <advance-policy-based-routing-profile>
#                         <profile>test_profile</profile>
#                     </advance-policy-based-routing-profile>
#                     <application-tracking />
#                     <description>test description</description>
#                     <enable-reverse-reroute />
#                     <host-inbound-traffic>
#                         <protocols>
#                             <name>all</name>
#                         </protocols>
#                         <protocols>
#                             <name>bgp</name>
#                             <except />
#                         </protocols>
#                         <system-services>
#                             <name>all</name>
#                         </system-services>
#                         <system-services>
#                             <name>dhcp</name>
#                             <except />
#                         </system-services>
#                     </host-inbound-traffic>
#                     <interfaces>
#                         <name>ge-0/0/3.0</name>
#                     </interfaces>
#                     <interfaces>
#                         <name>ge-0/0/4.0</name>
#                     </interfaces>
#                     <screen>test_screen</screen>
#                     <source-identity-log />
#                     <tcp-rst />
#                 </security-zone>
#             </zones>
#         </security>
#     </configuration>
# </rpc-reply>
#
- name: Parse security zones running config
  junipernetworks.junos.junos_security_zones:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed":  {
#     "functional_zone_management": {
#         "description": "test description 2",
#         "host_inbound_traffic": {
#             "protocols": [{"name": "all"}, {"except": True, "name": "bgp"}, {"except": True, "name": "bfd"}],
#             "system_services": [{"name": "all"}, {"except": True, "name": "dhcp"}, {"except": True, "name": "dhcpv6"}],
#         },
#         "interfaces": ["ge-0/0/1.0", "ge-0/0/2.0"],
#         "screen": "test_screen",
#     },
#     "security_zones": [
#         {
#             "address_book": {
#                 "address_sets": [
#                     {"addresses": ["test_adr1", "test_adr2"], "name": "test_adrset1"},
#                     {"addresses": ["test_adr3", "test_adr4"], "name": "test_adrset2"},
#                     {
#                         "address_sets": ["test_adrset1", "test_adrset2"],
#                         "addresses": ["test_adr5"],
#                         "description": "test description",
#                         "name": "test_adrset3",
#                     },
#                 ],
#                 "addresses": [
#                     {"description": "test desc", "ip_prefix": "10.0.0.0/24", "name": "test_adr1"},
#                     {"dns_name": {"ipv6_only": True, "name": "1.1.1.1"}, "name": "test_adr2"},
#                     {"name": "test_adr3", "range_address": {"from": "10.2.0.1", "to": "10.2.0.2"}},
#                     {"name": "test_adr4", "wildcard_address": "10.3.0.1/24"},
#                     {"description": "test desc", "ip_prefix": "10.1.0.0/24", "name": "test_adr5"},
#                 ],
#             },
#             "advance_policy_based_routing_profile": "test_profile",
#             "application_tracking": True,
#             "description": "test description",
#             "enable_reverse_reroute": True,
#             "host_inbound_traffic": {
#                 "protocols": [{"name": "all"}, {"except": True, "name": "bgp"}],
#                 "system_services": [{"name": "all"}, {"except": True, "name": "dhcp"}],
#             },
#             "interfaces": ["ge-0/0/3.0", "ge-0/0/4.0"],
#             "name": "test_sec_zone1",
#             "screen": "test_screen",
#             "source_identity_log": True,
#             "tcp_rst": True,
#         },
#         {"name": "test_sec_zone2", "source_identity_log": True, "tcp_rst": True},
#     ],
# }
#
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: "This output will always be in the same format as the module argspec.\n"

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: "This output will always be in the same format as the module argspec.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["<rpc-reply> <configuration> <security> <policies> <global> <policy> <name>test_glob_1</name> <match> <source-address>any-ipv6</source-address> <destination-address>any-ipv6</destination-address> <application>any</application> </match> <then> <deny /> </then> </policy> </global> </policies> </security> </configuration> </rpc-reply>"]

gathered

dictionary

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: "This output will always be in the same format as the module argspec.\n"

parsed

dictionary

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: "This output will always be in the same format as the module argspec.\n"

rendered

dictionary

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["<rpc-reply> <configuration> <security> <policies> <global> <policy> <name>test_glob_1</name> <match> <source-address>any-ipv6</source-address> <destination-address>any-ipv6</destination-address> <application>any</application> </match> <then> <deny /> </then> </policy> </global> </policies> </security> </configuration> </rpc-reply>"]

Authors

  • Pranav Bhatt (@pranav-bhatt)